Encapsulation Silicone Gel Manufacturers

Model No: RTV - 2ABS Silicone Gel

Features: Experienced Led encapsulation manufacturers. Silicone Gel for IC ,LED encapsulation use RTV-2ABS RTV- 2ABS為加成型矽凝膠，硬化後具有良好的物性,手感及緩衝性，可用於印刷電路板及LED蕊片及螢光粉之固定保護,絕緣,防潮及緩衝處理。硬化前物性 RTV-2 AS 粘度 4000 cps 比重 0.98 ± 0.02 外觀透明 RTV-2 BS 粘度 3000 cps 比重 0.98 ± 0.02 外觀透明硬化後物性體積電阻 > 1.0 x 1015 ohm-cm 絕緣強度 > 20 Kv/...

Model No: RAY - 2ABS-1 Silicone Gel

Features: Professional Led encapsulation manufacturers. RAY-2ABS-1 Silicone Gel for IC ,LED encapsulation use RAY- 2ABS-1為加成型矽凝膠，硬化後具有良好的物性,手感及緩衝性，可用於印刷電路板及LED蕊片及螢光粉之固定保護,絕緣,防潮及緩衝處理。硬化前物性 RAY-2 AS-1 粘度 4000 cps 比重 0.98 ± 0.02 外觀透明 RAY-2 BS-1 粘度 3000 cps 比重 0.98 ± 0.02 外觀透明硬化後物性體積電阻 > 1.0 x 1015 ohm-cm 絕緣強度...

Model No: Ray - 2ABS-1 Silicone Gel

Features: Top Led encapsulation manufacturers that supply a wide variety of goods. Silicone Gel for IC ,LED encapsulation use RAY- 2ABS-1為加成型矽凝膠，硬化後具有良好的物性,手感及緩衝性，可用於印刷電路板及LED蕊片及螢光粉之固定保護,絕緣,防潮及緩衝處理。硬化前物性 RAY-2 AS-1 粘度 4000 cps 比重 0.98 ± 0.02 外觀透明 RAY-2 BS-1 粘度 3000 cps 比重 0.98 ± 0.02 外觀透明硬化後物性體積電阻 > 1.0 x ...

Model No: RAY - 588 加成型矽膠

Features: RAY-588 Silicone Rubber for LED light,bulb encapsulation use 簡介 RAY-588為特殊規格之加成型矽膠，本身硬化後具有優良的白度及反射特性，對於金屬及部份樹脂更具有良好的覆著性。物性硬化前物性 RAY-588A RAY-588B 粘度 : 9000 cps 9000cps 顏色 : 白色白色硬化後物性顏色 : 白色. 硬度 : 50 (Shore A) 收縮率 : 0.1% 導熱系數: 0.28 w/m-K 體積電阻 : > 3.0 x 1010 ohm-cm 絕緣強度 : > 12Kv/mm 操作方法秤重取RAY-5...

Model No: RTV - 2ABH silicone gel

Features: Silicone Gel for IC ,LED encapsulation use RAY- 2ABH為加成型矽凝膠，硬化後具有良好的物性,手感及緩衝性，可用於電子晶片,印刷電路板的絕緣,防潮及緩衝處理,另一方應用充填在膠膜內可當為矽膠胸墊或高級鞋墊。硬化前物性 RTV- 2AH 粘度 5000 cps 比重 1.01 +/- 0.02 外觀透明 RTV- 2BH 粘度 5000 cps 比重 1.01 +/- 0.02 外觀透明硬化後物性體積電阻 > 1.0 x 1015 ohm-cm 絕緣強度 > 20 Kv/mm 折射率 1.407 穿透率 90% /450nm 硬度 10 ...

Model No: RAY - 8637 Silicone Rubber

Features: RAY-8637 Introductions :Due to the energy saver, best brightness and higher powder LEDs was applied on very field,as general illumination backlight for LCD, and Automotive light. In encapsulation epoxy resin can not stand heat cycle on applications，A new product Silicone rubber ,which had heat and w...

Model No: RAY - ABWS 加成型矽膠

Features: Silicone Gel for IC ,LED encapsulation use RAY- ABWS為特殊規格之加成型矽膠，本身硬化後具有優良的白度及反射特性，對於金屬及部份樹脂更具有良好的覆著性。硬化前物性 RAY- AWS 粘度 6000 cps 比重 1.01 ± 0.02 外觀白色 RAY-BWS 粘度 5000 cps 比重 1.01± 0.02 外觀白色硬化後物性體積電阻 > 1.0 x 1012 ohm-cm 絕緣強度 > 15Kv/mm 硬度 25A 操作方法秤重取RAY-AWS與RAY-BWS以1:1（重量比）之比例充份混合（此混合物粘度約5500 cps...

Model No: Ray - 8632 Silicone Rubber

Features: Silicone Rubber for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is suitable ...

Model No: Ray - 8677 silicone resin

Features: Silicone resin for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is suitable f...

Model No: Ray - 8152 Silicone resin

Features: Silicone Resin for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is suitable f...

CAROL YOUNG CORPORATION