V-grooved Tambour Board in Teak Veneer top and dark gray paper back on hard MDF board
- Model No
- CY287 - 86 teak
- Key Features
V-grooved Tambour Board in Teak Veneer top , aluminum foil top or others and dark gray paper back on hard MDF board for Roma column and shaped indoor decoration use . V-grooved panel with teak top Size: 3mm x 4' x 8' Panels USD 32/sheet This Product is available in 8-foot lengths to fit most standard basement support poles or lally columns. It is very easily to installate with normal glue by DIY. It is the best material with nature wood finishing on basement support pole,lally columns and shaped decoration. Advantage as follows, 1/ Glues is easily to pole for beautiful finishing touch. 2/ Height & width might be trimmed to fit. 3/ Can be stained or painted to match decoration. 4/ 48" x 8' sheet can be used as wall covering and easy to cut into needed size. 5/ Installation is easy in DIY. Simply cut the length with a fine tooth saw or miter box, and the width with a utility knife. Size: 3 mm x 48" x 8' panels with 13 mm or 21 mm width V-groove We also supply solid Oak mold to match the column in 6", 7" and 8" for 31/2", 4" and 41/2" diameter pole if need. Installation is easy. Simply cut the length with a fine tooth saw or miter box, and the width with a utility knife. Then glue v-grooved panel to the pole with construction adhesive. Next, you can glue or use finishing nails to install the optional solid red oak Cap & Base set for a nice finishing touch. Seal, stain or paint to match decoration.
Products are MADE IN TAIWAN not in China