V-grooved Tambour Board in Red Oak Veneer top , aluminum foil top or others and dark gray paper back on hard MDF board
for Roma column and shaped indoor decoration use .
One way to hide an unsightly basement support post—whether it's square, rectangular,
or round—is to remove it, right? This could be a costly adventure! You could build a box
around it, but that can be just as unattractive as the post. So what do you do? Try Pole-Wrap.
It is constructed of closely set wood strips held together by a flexible backing. Relief cuts point
to the outside, and the finished surface is laminated with an oak veneer so it easily wraps a post—
and gives it a little class, especially if Pole-Wrap has been stained. If painted, it would blend in
beautifully with the rest of the environment. In a sense you are "beautifying" the post. Or use it as
a wall covering.
V-grooved panel
Size: 4' x 8' Panels USD 26/sheet
This Product is available in 8-foot lengths to fit most standard
basement support poles or lally columns. It is very easily to
installate with normal glue by DIY.
It is the best material with nature wood finishing on basement
support pole,lally columns and shaped decoration.
Advantage as follows,
1/ Glues is easily to pole for beautiful finishing touch.
2/ Height & width might be trimmed to fit.
3/ Can be stained or painted to match decoration.
4/ 48" x 8' sheet can be used as wall covering and easy to cut into needed size.
5/ Installation is easy in DIY. Simply cut the length with a fine tooth saw
or miter box, and the width with a utility knife.
Installation is easy. Simply cut the length with a fine tooth saw or miter
box, and the width with a utility knife. Then glue v-grooved panel to the
pole with construction adhesive. Next, you can glue or use finishing nails
to install the optional solid red oak Cap & Base set for a nice finishing
touch seal, stain or paint to match decoration.
