silicone for LED/LCD encapsulation use

view gallery | view list | Show items per page

select all

Click to select products , then click on Add to Inquiry Cart

Silicone Rubber for LED ,IC Encapsulating use

Model No: Ray - 8637 Silicone Rubber

Features: 封裝必須讓LED有最佳的散熱性，特別是HB（高亮度）幾乎意味著HP （High Power，高功率、高用電），進出LED的電流值持續在增大，倘若不能良善散熱，則不僅會使LED的亮度減弱，還會縮短LED的使用壽命。過去LED最常用的是環氧樹脂（epoxy），不過環氧樹脂老化後會逐漸變黃（因「苯環」成份），進而影響光亮顏色，尤其波長愈低時老化愈快，特別是部分WLED使用近紫外線（Near ultraviolet）發光，與其他可見光相比其波長又更低，老化更快。矽樹脂（silicone）換替環氧樹脂矽膠除了對低波長有較佳的抗受性、較不易老化外，矽膠阻隔近紫外線使其不外洩也是對人體健康的一種保護，此外矽...
Silicon.Series for LED Encapsulation

Model No: Silicone for LED Encapsulate

Features: Silicone Series for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is suitable ...
單液脫酮氨形矽橡膠

Model No: REV-6810L

Features: REV-6810L為單液脫酮氨形矽橡膠。廣泛用於印刷電路板、電器、玻璃、陶瓷、塑膠、鋁各種金屬之接合及填充同一般有機橡膠比較, REV-6810L具有良好的接著強度及優良之物性，而且抗化學藥品特別優異。規格 : 顏色 : 半透明硬度 (ASTM D2240) : 30 (Hardness Shore A) 張力強度(ASTM D412) : 10.0 kg/cm2 延展率(ASTM D412) : 350﹪ 撕裂強度(ASTM D624) : >8.0 N/mm 體積電阻 : > 1.0 x 1014 ohm-cm 收縮率 : <0.5﹪ 指乾時間 : 45~55 min.Ø REV-...
Silicone gel/rubber for optical encapsulation use

Model No: RAY-8626 additional type

Features: RAY-8626 Introductions : Due to the energy saver, best brightness and higher powder LEDs was applied on very field, as general illumination backlight for LCD, and Automotive light. In encapsulation epoxy resin can not stand heat cycle on applications，RAY-8626 is high heat resistant additional type s...
Silicone gel/rubber for optical encapsulation use

Model No: RAY-8636 加成型LED封装用矽胶

Features: RAY-8636H Silicone gel/rubber for optical encapsulation use Introductions : Due to the energy saver, best brightness and higher powder LEDs was applied on very field,as general illumination backlight for LCD, and Automotive light. In encapsulation epoxy resin can not stand heat cycle on applications...
Silicone Rubber for LED light,bulb encapsulation use

Model No: RAY - 588 加成型矽膠

Features: RAY-588 Silicone Rubber for LED light,bulb encapsulation use 簡介 RAY-588為特殊規格之加成型矽膠，本身硬化後具有優良的白度及反射特性，對於金屬及部份樹脂更具有良好的覆著性。。物性硬化前物性 RAY-588A RAY-588B 粘度 ; 9000 cps 9000cps 顏色 ; 白色白色硬化後物性顏色 ; 白色. 硬度 ; 50 (Shore A) 收縮率 ; 0.1% 導熱系數 ; 0.28 w/m-K 體積電阻 ; > 3.0 x 1010 ohm-cm 絕緣強度 ; > 12Kv/mm 操作方法秤重取RAY-...

Click to select products , then click on Add to Inquiry Cart

Total 6 results. 10 records per page.

CAROL YOUNG CORPORATION

CAROL YOUNG CORPORATION

Contact

Taiwantrade Member confirmed by

silicone for LED/LCD encapsulation use

Silicone Rubber for LED ,IC Encapsulating use

Silicon.Series for LED Encapsulation

單液脫酮氨形矽橡膠

Silicone gel/rubber for optical encapsulation use

Silicone gel/rubber for optical encapsulation use

Silicone Rubber for LED light,bulb encapsulation use