加成型鏡面耐熱矽膠

Model No: RTV-588-1

Features: 加成型鏡面耐熱矽膠 RAY-588-1 簡介 RAY-588-1為特殊規格之加成型矽膠，本身硬化後具有優良的白度及反射特性，對於金屬及部份樹脂更具有良好的覆著性。。 物性 : 硬化前物性 : RAY-588-1A RAY-588-1B 粘度 : 8000 cps 8000cps 顏色 : 白色 白色 硬化後物性 : 顏色 : 白色. 硬度 : 30 (Shore A) 收縮率 : 0.1% 導熱系數 : 0.28 w/m-K 體積電阻 : > 3.0 x 1010 ohm-cm 絕緣強度 : > 12Kv/mm 操作方法 : 秤重 : 取RAY-588-1A與RAY-588-1B以1:1（重量...

Silicon Rubber for adhesive seal and water proof use.

Model No: TR - 6820

Features: Introduction： TR-6820 is a one-component sealant. The product is designed for many industrial and construction application. Such used for permanently flexible seal, high tensile strength, excellent weather resist, good adhesion between metal, glass,ceramic, wood and plastic. Typical properties : App...

Heat Resistant Glue RTV-548 (addition type silicone) for adhesive and encapsulation use

Model No: RTV - 548 addition type

Features: Heat Resistant Glue RTV-548 (addition type silicone) for adhesive and encapsulation use The product is designed for many electric, industrial and construction application. Such used for permanently flexible seal, high tensile strength, excellent weather resist, good adhesion between metal, glass,cer...

RTV-2 AB Silicone gel

Model No: RTV - 2 AB Silicone gel

Features: RTV-2 AB Silicone gel RTV- 2AB為加成型矽凝膠，硬化後具有良好的物性,手感及緩衝性， 可用於電子晶片,印刷電路板的絕緣,防潮及緩衝處理,另一方應用充填在 膠膜內可當為矽膠胸墊或高級鞋墊。 硬化前物性 RTV-2 A 粘度 400 cps 比重 1.03 外觀 透明 RTV-2 B 粘度 650 cps 比重 1.02 外觀 透明 硬化後物性 體積電阻 > 1.0 x 1015 ohm-cm 絕緣強度 > 20 Kv/mm 折射率 1.407 穿透率 90% /450nm 熱重損失 20 Kv/mm 折射率 1.407 穿透率 90% /450nm 熱重損失 < 0....

Silicone Series for LED ,IC Encapsulating use

Model No: Ray - 6822

Features: Silicone Series for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is suitable ...

ST-8211 primer for plastic film and encapsulating

Model No: ST - 8211

Features: ST-8211 primer for plastic film and encapsulating ST-8211表面處理劑,廣泛用於金屬或樹脂表面粘著之提升.尤其對於 epoxy及PET,PBT樹脂更有明顯之改善 : 物性 粘度 5-10 cps 比重 0.8 外觀 透明 操作方法 均匀塗佈在橡塑膠或鋁铜箔上，置入100℃-150℃烘箱中2-5分鐘，即可 完成表面處理功能 suggest Solid contents: 30 % or less for coating

One component Silicone for LED ,IC Encapsulating use

Model No: Ray - 8011

Features: One component Silicone for LED ,IC Encapsulating use Our silicone series for encapsulation field exclusively apply in LED, IC chips, CPU & VLSI to transfer the internal heat to outside region, stain higher temperature, moisture proof,adhesive for better weather resistance . Our silicone series is su...

PSR-8211AB for protecting film adhesive purpose

Model No: PSR - 8211AB

Features: Silicone adhesive/protecting coating for Polyester/plastic film For some plastic film, please use our ST-8211 for primer PSR-8211掛旯撿衄?謎眳昜燴摯趙�眳杻俶ㄛ秪森褫�蚚婓FR4眕摯 MCPCB荂芃?繚啣腔梜翍,稷?,��,滅陰摯?茇?燴﹝珨啜奧晟, 朏炵蹈家こ褫眕婓 (-50)祫200⊥眳�璃眳狟墿�嶲妏蚚奧�夔峎厥坳掛旯腔杻俶.. 茞趙ヶ昜俶 PSR-8211A 梜僅 600 cps 掀笭 1.01 ㊣ 0.02 俋罠 芵隴 PRS-8211B 梜僅 800 c...

Silicone Series for LED ,IC Encapsulating use

Model No: Silicone for Encapsulating

Features: S i l i c o n e S e r i e s f o r L E D , I C E n c a p s u l a t i n g u s e O u r s i l i c o n e s e r i e s f o r e n c a p s u l a t i o n f i e l d e x c l u s i v e l y a p p l y i n L E D , I C c h i p s , C P U & a m p ; a m p ; V L S I t o t r a n s f e r t h e i n t e r n a l h e a t t o ...

All popular and economic Silicone sealant/adhesive TR-6825 in neutral oxime type

Model No: TR - 6825

Features: All popular and economic Silicone sealant/adhesive TR-6825 in neutral oxime type Carol TR-6825 is a one-component silicone sealant/adhesive in neutral oxime type. The product is designed for many industrial and construction application. Such used for permanently flexible seal, high tensile strength,...